Antec Memory DDR4 PC19200 2400MHz 4GB (1x4GB) Red Led - AMD4UZ124001604G-5SR

Overview

The Antec Memory DDR4 PC19200 2400MHz 4GB (1x4GB) Red LED module (model AMD4UZ124001604G-5SR) is designed for users who want to enhance the performance and aesthetics of their desktop PC builds. This DDR4 memory module features 2400MHz speed and a 4GB capacity, ideal for general computing, gaming, and multitasking. It also comes with a red LED light to add a visual flair to your setup. This module is compatible with systems that support DDR4 and 2400MHz speeds, making it a great option for both upgrading or building a new system.

How to Use / Install

Installation Steps

1. Prepare Your PC – Turn off your PC, unplug it from the power source, and open the case to access the motherboard.
2. Locate RAM Slots – Identify the available DIMM slots on the motherboard, which are usually located near the CPU.
3. Align the Memory Module – Carefully align the Antec DDR4 memory module with the slot. Make sure the notch on the memory module lines up with the ridge inside the slot.
4. Insert the Module – Gently but firmly press down on the memory module until it clicks into place. You should hear a soft click when the pins make proper contact.
5. Secure the Module – Ensure the latches on either side of the RAM slot snap into place, securing the memory module.
6. Reassemble the Case – Once the memory module is installed, close the PC case and reconnect the power.
7. Power On – Turn your system back on, and the memory should automatically be recognized by your motherboard. Check your system settings or BIOS to confirm that the memory is properly detected.

Available Services, Licenses, and Plans

The Antec Memory DDR4 PC19200 2400MHz 4GB (1x4GB) Red LED does not require any subscriptions or software licenses. The following services are available:

• Limited Warranty – This memory module is backed by a limited warranty, ensuring protection against manufacturing defects.
• Technical Support – Antec offers customer service for troubleshooting or installation assistance if needed.

Main Differences Between Services / Licenses / Plans

• Limited Warranty – Covers any potential issues that arise due to manufacturing defects, typically for 1 year.
• Technical Support – Provides installation help, compatibility information, and assistance for any issues during the installation or use of the memory module.

10 Key Features of the Antec Memory DDR4 PC19200 2400MHz 4GB (1x4GB) Red LED

1. High Speed – Operates at a speed of 2400MHz, providing a fast and smooth experience for general computing tasks and gaming.
2. 4GB Capacity – Offers 4GB of memory, ideal for most mid-range systems or users looking to upgrade their setup.
3. Red LED Lighting – The built-in red LED lighting adds a dynamic and stylish look to your PC, perfect for gamers and enthusiasts.
4. DDR4 Technology – Utilizes the latest DDR4 technology for improved performance and energy efficiency compared to older memory types.
5. Enhanced Stability – Designed to operate at a stable 2400MHz frequency, ensuring smooth multitasking and system performance.
6. Compatible with AMD and Intel Platforms – Compatible with motherboards that support DDR4 and 2400MHz speeds, including AMD and Intel platforms.
7. Easy Installation – Simple to install with no complex setup required. Just plug it into an available DIMM slot.
8. Cost-Effective – A budget-friendly option for users who want reliable performance without spending too much.
9. Energy Efficient – Operates at a lower voltage, reducing power consumption and enhancing overall system efficiency.
10. Single Channel – This module comes as a single 4GB stick, suitable for single-channel configurations or upgrades to existing setups.

Similar Products / Competitor Products

Corsair Vengeance LPX 4GB DDR4 2400MHz – A reliable memory module offering similar specifications with a focus on high performance and low profile design.
Crucial Ballistix 4GB DDR4 2400MHz – Another strong competitor, providing reliable performance, low-profile design, and easy compatibility with a variety of systems.

The Antec Memory DDR4 PC19200 2400MHz 4GB (1x4GB) Red LED is an excellent choice for users looking to enhance both the performance and appearance of their PC. Whether upgrading an existing system or building a new one, it delivers speed, reliability, and a stylish red LED glow to complete any build.