EAP610-Outdoor AX1800 Gigabit Wi-Fi 6 Indoor/Outdoor Access Point

Overview

The EAP610-Outdoor AX1800 Gigabit Wi-Fi 6 Indoor/Outdoor Access Point is a rugged, high-performance access point designed for both indoor and outdoor deployments. It features Wi-Fi 6 technology, delivering speeds of up to 1800 Mbps (1201 Mbps on 5 GHz + 574 Mbps on 2.4 GHz), and supports OFDMA, MU-MIMO, and BSS Coloring for efficient network performance in high-density environments. With IP67-rated weatherproofing, Omada SDN integration, and PoE support, the EAP610-Outdoor is ideal for public venues, campuses, and large outdoor areas.


1. How to Use & Install the EAP610-Outdoor AX1800

Installation Steps:

  1. Mount the Access Point:
    • Use the pole-mount or wall-mount kit included for secure installation.
  2. Powering the Device:
    • Supports Power over Ethernet (PoE) 802.3at, allowing power and data transmission over a single cable.
  3. Network Connection:
    • Connect the EAP610-Outdoor to a Gigabit switch or router using an Ethernet cable.
  4. Configuration:
    • Access the web-based interface or use the Omada Controller software.
    • Configure Wi-Fi SSIDs, VLANs, security settings, and guest networks.
  5. Management & Monitoring:
    • Utilize Omada SDN for cloud-based or on-premises centralized management.
    • Optimize performance with band steering, load balancing, and seamless roaming.

2. Types of Services, Licenses, and Plans Available

The EAP610-Outdoor AX1800 does not require additional licenses but supports multiple deployment and management options:

  • Standalone Mode – Managed via web GUI for small-scale setups.
  • Omada SDN (Software-Defined Networking) Integration – Enables cloud-based or on-premises centralized management.
  • Captive Portal & Guest Network – Secure and customizable Wi-Fi authentication for public access.

3. Main Differences Between Service Plans

Feature Standalone Mode Omada SDN Management Captive Portal Service
Basic Wi-Fi Access ✔️ ✔️ ✔️
Centralized Management ✔️ ✔️
Cloud-Based Control ✔️ ✔️
Guest Authentication ✔️ ✔️
High-Density Optimization ✔️ ✔️

4. 10 Key Features of the EAP610-Outdoor AX1800

  1. Wi-Fi 6 Technology (AX1800 Speed) – Supports 1201 Mbps on 5 GHz + 574 Mbps on 2.4 GHz for high-speed, low-latency connections.
  2. Weatherproof Design (IP67 Rated) – Protects against dust, water, and extreme weather conditions.
  3. Gigabit Ethernet Port – Ensures high-speed wired connectivity.
  4. PoE (Power over Ethernet) Support – Uses 802.3at PoE for flexible outdoor installation.
  5. Omada SDN Compatibility – Enables centralized cloud-based or local network management.
  6. Guest Network with Captive Portal – Allows secure, customizable guest Wi-Fi authentication.
  7. BSS Coloring & Beamforming – Reduces Wi-Fi interference and enhances signal strength.
  8. Seamless Roaming & Load Balancing – Works with multiple Omada APs to provide uninterrupted connectivity and traffic distribution.
  9. OFDMA & MU-MIMO – Optimizes network efficiency by allowing multiple devices to transmit simultaneously.
  10. Long-Range Coverage – High-gain antennas and external antenna support for extended outdoor coverage.

5. Competitor Products

  1. Ubiquiti UniFi U6-Mesh – A Wi-Fi 6 outdoor mesh AP with high-speed performance and UniFi controller support.
  2. Cisco Meraki MR76 – A Wi-Fi 6 outdoor AP with enterprise-grade features and cloud management.

 

The EAP610-Outdoor AX1800 Gigabit Wi-Fi 6 Indoor/Outdoor Access Point is a powerful and durable Wi-Fi solution for outdoor environments, offering fast speeds, wide coverage, and centralized management capabilities.