QNAP M.2 SSD Expansion Card QM2-2P10G1TB

Overview

The QNAP M.2 SSD Expansion Card QM2-2P10G1TB is a high-performance PCIe add-on card designed to enhance storage capacity and network connectivity in compatible QNAP NAS and PC systems. This expansion card integrates dual M.2 SSD slots and a high-speed 10GbE network adapter, making it an ideal solution for improving system performance, storage efficiency, and data transfer speeds.

How to Install & Use

Installation Steps:

1. Unpack & Inspect Components: Ensure the QNAP QM2-2P10G1TB is undamaged and includes all necessary components.

2. Power Off the System: Shut down your QNAP NAS or PC and unplug it from the power source.

3. Install the Expansion Card: Insert the QM2-2P10G1TB into an available PCIe slot.

4. Secure the Card: Fasten the expansion card to the chassis using screws if necessary.

5. Install M.2 SSDs: Insert compatible M.2 SSDs into the dedicated slots.

6. Reconnect Power & Boot Up: Power on the device and access system settings.

7. Configure the Storage & Network: Use QTS/QNAP software to set up the M.2 SSDs and 10GbE network interface.

8. Verify System Functionality: Check system logs and network performance to ensure everything is functioning correctly.

Services, Licenses & Plans Available

The QNAP QM2-2P10G1TB comes with different service and support options:

1. Standard Warranty (Included) – Covers manufacturing defects and performance issues.

2. Extended Warranty Plan – Additional coverage for long-term reliability.

3. Priority Technical Support – Dedicated support for faster issue resolution.

4. On-Site Repair Services – Professional assistance for critical system failures.

Key Differences Between Plans

• Standard Warranty: Basic protection against hardware defects.

• Extended Warranty: Additional years of support for peace of mind.

• Priority Technical Support: Direct access to QNAP’s expert support team.

• On-Site Repair Services: Professional troubleshooting and hardware replacement at your location.

Key Features of QNAP QM2-2P10G1TB

1. Dual M.2 SSD Slots – Supports NVMe M.2 SSDs for high-speed storage expansion.

2. Built-in 10GbE Port – Enables ultra-fast networking for NAS and PC environments.

3. PCIe 3.0 Interface – Maximizes data transfer speeds and system performance.

4. Efficient Thermal Design – Includes a heatsink and smart fan for optimal cooling.

5. Seamless NAS Integration – Designed for QNAP NAS devices to enhance SSD caching.

6. RAID Support – Allows SSDs to be configured in RAID 0 or RAID 1 for performance or redundancy.

7. Reduced Latency – Improves data transfer rates for high-performance workloads.

8. Easy Installation – Plug-and-play setup with automatic detection by QTS.

9. Broad Compatibility – Works with QNAP NAS and PC systems with available PCIe slots.

10. Enhanced Virtualization Support – Ideal for running virtual machines and high-speed data transfers.

Competitor Products

1. ASUS Hyper M.2 x16 Card – A high-performance PCIe expansion card for M.2 SSDs.

2. Intel X550-T2 Network Adapter – A 10GbE network card with high-speed data transfer support.

The QNAP M.2 SSD Expansion Card QM2-2P10G1TB is an essential upgrade for users looking to boost storage capacity and network performance. With dual M.2 SSD slots and a built-in 10GbE port, it is an excellent solution for data-intensive applications, virtualization, and high-speed networking environments.