QNAP Bracket BRKT-QM2-10G1T

Overview

The QNAP Bracket BRKT-QM2-10G1T is a high-performance expansion card mounting bracket designed for QNAP NAS devices. It provides a secure and efficient solution for installing QM2 series expansion cards, such as those enabling 10GbE networking and M.2 SSD caching.

How to Use/Install

1. Unbox the Bracket: Ensure all necessary components are included.

2. Power Down the NAS: Turn off the QNAP NAS and disconnect it from power.

3. Open the NAS Case: Access the PCIe expansion slot.

4. Attach the Bracket: Align the QNAP Bracket BRKT-QM2-10G1T with the mounting points.

5. Secure with Screws: Use the provided screws to fasten the bracket in place.

6. Install the QM2 Card: Insert the QM2-10G1T expansion card into the PCIe slot.

7. Connect Cables: Attach necessary cables, such as network or power connections.

8. Close the NAS Case: Secure the case and reconnect power.

9. Boot Up the NAS: Turn on the system and check for hardware detection.

10. Configure in QTS: Set up the card via the QTS operating system.

Available Services, Licenses, or Plans

The QNAP Bracket BRKT-QM2-10G1T is a hardware accessory and does not require any specific service, license, or subscription plan. However, the QM2-10G1T expansion card it supports may require firmware updates or software configurations.

10 Key Features of QNAP Bracket BRKT-QM2-10G1T

1. Optimized for QM2 Series – Designed for QNAP QM2-10G1T and similar expansion cards.

2. High-Quality Construction – Durable materials ensure long-lasting performance.

3. Secure Mounting – Provides a stable installation for expansion cards.

4. Improves Airflow – Helps maintain cooling efficiency in NAS systems.

5. Supports 10GbE Networking – Ideal for high-speed data transfers.

6. M.2 SSD Caching Support – Allows for better storage performance with QM2 cards.

7. Easy Installation – Simplifies hardware setup for users.

8. Lightweight Design – Adds minimal weight to the system.

9. Anti-Vibration Structure – Reduces system vibrations for stability.

10. Compatibility – Works with multiple QNAP NAS models supporting QM2 cards.

Competitor Products

1. Synology E10G18-T1 Bracket – A similar bracket designed for Synology NAS 10GbE expansion cards.

2. ASUS XG-C100C Mounting Bracket – A competitor product for 10GbE network card installations.

The QNAP Bracket BRKT-QM2-10G1T is a crucial accessory for QNAP NAS users looking to expand their system with 10GbE networking and M.2 SSD caching. With its durable construction and secure mounting, it enhances both stability and performance.