QNAP Bracket BRKT-QXG-10G2T

Overview

The QNAP Bracket BRKT-QXG-10G2T is a high-performance expansion card mounting bracket designed for QNAP NAS devices. It provides a secure and efficient solution for installing QXG series expansion cards, such as those enabling dual-port 10GbE networking.

How to Use/Install

1. Unbox the Bracket: Ensure all necessary components are included.

2. Power Down the NAS: Turn off the QNAP NAS and disconnect it from power.

3. Open the NAS Case: Access the PCIe expansion slot.

4. Attach the Bracket: Align the QNAP Bracket BRKT-QXG-10G2T with the mounting points.

5. Secure with Screws: Use the provided screws to fasten the bracket in place.

6. Install the QXG Card: Insert the QXG-10G2T expansion card into the PCIe slot.

7. Connect Cables: Attach necessary cables, such as network or power connections.

8. Close the NAS Case: Secure the case and reconnect power.

9. Boot Up the NAS: Turn on the system and check for hardware detection.

10. Configure in QTS: Set up the card via the QTS operating system.

Available Services, Licenses, or Plans

The QNAP Bracket BRKT-QXG-10G2T is a hardware accessory and does not require any specific service, license, or subscription plan. However, the QXG-10G2T expansion card it supports may require firmware updates or software configurations.

10 Key Features of QNAP Bracket BRKT-QXG-10G2T

1. Optimized for QXG Series – Designed for QNAP QXG-10G2T and similar expansion cards.

2. High-Quality Construction – Durable materials ensure long-lasting performance.

3. Secure Mounting – Provides a stable installation for expansion cards.

4. Improves Airflow – Helps maintain cooling efficiency in NAS systems.

5. Supports Dual 10GbE Networking – Ideal for high-speed data transfers with two ports.

6. Enhanced Bandwidth – Allows for better network redundancy and load balancing.

7. Easy Installation – Simplifies hardware setup for users.

8. Lightweight Design – Adds minimal weight to the system.

9. Anti-Vibration Structure – Reduces system vibrations for stability.

10. Compatibility – Works with multiple QNAP NAS models supporting QXG cards.

Competitor Products

1. Synology E10G18-T2 Bracket – A similar bracket designed for Synology NAS dual-port 10GbE expansion cards.

2. ASUS XG-C100F Mounting Bracket – A competitor product for dual-port 10GbE network card installations.

The QNAP Bracket BRKT-QXG-10G2T is a crucial accessory for QNAP NAS users looking to expand their system with dual-port 10GbE networking. With its durable construction and secure mounting, it enhances both stability and performance.