CLE140JCAELK Laptop Screen 14.0 N140JCA-ELK 1920*1200 FHD+ IPS N140JCA-ELK
Overview
The CLE140JCAELK Laptop Screen 14.0″ N140JCA‑ELK 1920×1200 FHD+ IPS is a premium 14.0‑inch FHD+ (1920×1200) IPS display engineered for modern laptops and ultrabooks. With its N140JCA‑ELK panel designation, this screen delivers crisp visuals, wide 16:10 aspect ratio, and accurate color reproduction—ideal for productivity, design, and multimedia.
The CLE140JCAELK Laptop Screen 14.0″ N140JCA‑ELK 1920×1200 FHD+ IPS is fully compatible with any chassis supporting the 40‑pin eDP connector and N140JCA‑ELK mounting pattern.
How to Use / Install
-
Power off the laptop and disconnect from AC.
-
Remove the bezel: Use a plastic pry tool to gently pop off the front bezel.
-
Unscrew the old panel: Remove the four corner screws securing the existing screen.
-
Disconnect the 40‑pin eDP cable from the old panel.
-
Connect the CLE140JCAELK Laptop Screen 14.0″ N140JCA‑ELK 1920×1200 FHD+ IPS to the eDP connector.
-
Mount the new panel using the original screws.
-
Reattach the bezel and power on—verify backlight, resolution, and color accuracy.
Services / Warranty Plans
Though a hardware-only product, these service options are commonly offered:
-
Standard Purchase (includes 12‑month warranty)
-
Extended Warranty Plan (+12–24 months coverage)
-
Professional Installation Service
-
Return & Replacement Service (RMA support within warranty)
Main Differences Between Service Plans
| Service Option | Coverage / Features | Recommended For |
|---|---|---|
| Standard Purchase | Panel + 12‑month manufacturer warranty | DIY technicians |
| Extended Warranty | Additional 12–24 months of protection | Business-critical devices |
| Installation Service | Expert fitting and calibration | Non-technical end users |
| Return & Replacement | RMA processing for defective units | Risk-averse purchasers |
10 Key Features of CLE140JCAELK Laptop Screen 14.0″ N140JCA‑ELK 1920×1200 FHD+ IPS
-
Screen Size: 14.0″ diagonal
-
Resolution: 1920×1200 (FHD+; 16:10 aspect)
-
Panel Type: IPS for wide viewing angles (≥178°)
-
Connector: 40‑pin eDP, 1.2 GHz interface
-
Brightness: 300 nits typical
-
Contrast Ratio: 1000:1 typical
-
Color Gamut: 72% NTSC (≈100% sRGB)
-
Response Time: 25 ms gray‑to‑gray
-
Mounting Pattern: Standard N140JCA‑ELK screw layout
-
Power Consumption: ≤3.5 W (typical operation)
Competitor Products
-
LP140WQ3-SPA1 – 14.0″ 1920×1200 IPS, 40‑pin eDP, slim profile
-
N140HCA‑EA2 – 14.0″ FHD+ (1920×1200) IPS, 40‑pin connector, OEM replacement