CLE140HCEN2 14.0 30 Pin Fhd (N140Hca-En2 Rev-c2) IPS 100%RGB N140HCE-EN2 Rev-C2
Overview
The CLE140HCEN2 14.0″ 30‑PIN FHD IPS 100% RGB (N140HCE‑EN2 Rev‑C2) is a premium 14.0‑inch Full HD (1920×1080) IPS laptop display offering 100% RGB color gamut. Known by its OEM designation N140HCE‑EN2 Rev‑C2, this panel delivers vibrant, accurate colors and wide 178° viewing angles. The CLE140HCEN2 is designed for systems with a 30‑pin eDP connector and standard screw‑mount frame.
How to Use / Install
-
Power off the laptop and remove the AC adapter.
-
Pry off the front bezel gently with a plastic tool.
-
Unscrew the four corner screws securing the existing screen.
-
Disconnect the 30‑pin eDP cable from the old panel.
-
Attach the 30‑pin cable to the CLE140HCEN2 14.0″ 30‑PIN FHD IPS 100% RGB connector.
-
Secure the panel using the original screws in the N140HCE‑EN2 Rev‑C2 mounting holes.
-
Reinstall the bezel and power on—verify Full HD resolution, IPS clarity, and 100% RGB coverage.
Tip: Ground yourself to avoid static discharge when handling the CLE140HCEN2 14.0″ 30‑PIN FHD IPS 100% RGB (N140HCE‑EN2 Rev‑C2).
Service / Warranty Options
Although hardware‑only, typical offerings include:
-
Standard Purchase (12‑month manufacturer warranty)
-
Extended Warranty (additional 12–24 months)
-
Professional Installation Service
-
Return & Replacement Policy (RMA support within warranty)
Main Differences Between Service Plans
| Service Option | Coverage / Features | Recommended For |
|---|---|---|
| Standard Purchase | Panel + 12‑month warranty | DIY technicians |
| Extended Warranty | +12–24 months protection | Business‑critical systems |
| Installation Service | Expert on‑site or mail‑in fitting | Non‑technical users |
| Return & Replacement | RMA processing for defective units | Risk‑averse purchasers |
10 Key Features of CLE140HCEN2 14.0″ 30‑PIN FHD IPS 100% RGB
-
Screen Size: 14.0″ diagonal
-
Resolution: Full HD 1920×1080 pixels
-
Panel Type: IPS with 178° viewing angles
-
Color Gamut: 100% RGB (wide color accuracy)
-
Connector: 30‑pin eDP (standard laptop interface)
-
Mounting: Standard 4‑screw frame (N140HCE‑EN2 Rev‑C2)
-
Brightness: 300 nits typical
-
Contrast Ratio: 800:1 typical
-
Response Time: 25 ms gray‑to‑gray
-
Power Efficiency: LED backlight, low power draw
Competitor Products
-
LP140WF3‑SPF1 – 14.0″ FHD IPS, 30‑pin eDP, 72% NTSC gamut
-
N140HCE‑EA1 – 14.0″ FHD IPS, 30‑pin connector, 45% NTSC gamut