CPE510 5GHz 300Mbps 13dBi Outdoor Wireless CPE

Overview

The CPE510 5GHz 300Mbps 13dBi Outdoor Wireless CPE is a high-power outdoor networking device designed for long-range wireless transmission in point-to-point (PtP) and point-to-multipoint (PtMP) applications. With a directional 13dBi high-gain antenna, advanced TDMA technology, and IP65-rated weatherproof housing, it is ideal for wireless internet distribution, CCTV networks, and rural broadband expansion.

How to Use/Install

1. Unbox the CPE510 and verify all included accessories.
2. Mount the device on a pole or wall using the provided mounting hardware.
3. Connect an Ethernet cable from the LAN port to the PoE injector.
4. Connect another Ethernet cable from the PoE injector to a router, switch, or network source.
5. Plug in the PoE injector and power on the device.
6. Access the web interface at http://192.168.0.254 and log in.
7. Choose the appropriate operation mode (AP, Client, Repeater, or Bridge).
8. Adjust the antenna alignment for optimal signal strength and coverage.
9. Save settings and restart the device for final deployment.

Available Services/License/Plans

1. Point-to-Point (PtP) Mode – Establishes a direct wireless link between two locations.
2. Point-to-Multipoint (PtMP) Mode – Connects multiple remote sites to a single access point.
3. Access Point Mode – Converts a wired network into an outdoor wireless hotspot.
4. Client Mode – Connects to an existing Wi-Fi network as a receiver.

Differences Between Services/Plans

• PtP Mode: Ideal for wireless bridging between two buildings.
• PtMP Mode: Best for wireless ISP deployments and multi-client access.
• AP Mode: Creates an outdoor wireless network for public or private use.
• Client Mode: Functions as a receiver to extend an existing wireless network.

10 Key Features of CPE510 5GHz 300Mbps

1. 5GHz 300Mbps Wireless Speed for interference-free, high-speed connections.
2. 13dBi High-Gain Directional Antenna to enhance signal focus and coverage.
3. Outdoor-Optimized Design with IP65-rated weatherproof housing.
4. Passive PoE Support (up to 60m power delivery) for flexible installations.
5. Pharos Control Software for centralized management of multiple devices.
6. Adjustable Transmission Power (0-27dBm) for custom range settings.
7. TDMA Technology for improved efficiency in multi-user environments.
8. Multiple Operating Modes (AP, Client, Repeater, Bridge, Router).
9. Surge Protection & High-Quality Components for enhanced durability.
10. Perfect for Wireless ISPs, CCTV Surveillance, and Rural Network Extensions.

Competitor Products

1. Ubiquiti NanoStation 5AC Loco – A 5GHz outdoor CPE with directional antennas.
2. MikroTik SXT 5 – Another long-range 5GHz wireless solution for PtP and PtMP setups.

The CPE510 5GHz 300Mbps 13dBi Outdoor Wireless CPE is a powerful and cost-effective solution for long-range wireless networking, making it ideal for businesses, farms, remote areas, and large outdoor Wi-Fi deployments.