CPE710 5GHz 867Mbps 23dBi Outdoor Wireless CPE

Overview

The CPE710 5GHz 867Mbps 23dBi Outdoor Wireless CPE is a high-performance, long-range outdoor wireless solution designed for point-to-point (PtP) and point-to-multipoint (PtMP) applications. Featuring an advanced 23dBi directional antenna, MU-MIMO support, and beamforming technology, it ensures high-speed, interference-resistant connectivity for wireless ISPs, surveillance systems, and remote networking.

How to Use/Install

1. Unbox the CPE710 and verify all included accessories.
2. Mount the device securely on a pole or wall using the provided hardware.
3. Connect an Ethernet cable from the LAN port to the PoE injector.
4. Connect another Ethernet cable from the PoE injector to a router, switch, or network source.
5. Plug in the PoE injector to power on the device.
6. Access the web interface at http://192.168.0.254 and log in.
7. Select the operation mode (AP, Client, Repeater, or Bridge) based on your network setup.
8. Align the antenna for optimal signal transmission and reception.
9. Save settings and restart the device for final deployment.

Available Services/License/Plans

1. Point-to-Point (PtP) Mode – Creates a high-speed, long-distance wireless link between two locations.
2. Point-to-Multipoint (PtMP) Mode – Connects multiple remote sites to a central access point.
3. Access Point Mode – Converts a wired network into an outdoor Wi-Fi hotspot.
4. Client Mode – Connects to an existing Wi-Fi network as a receiver.

Differences Between Services/Plans

• PtP Mode: Ideal for wireless bridging between two buildings or remote sites.
• PtMP Mode: Best for multi-site connectivity, such as rural internet deployment.
• AP Mode: Creates a Wi-Fi network for outdoor environments.
• Client Mode: Functions as a receiver to extend an existing network.

10 Key Features of CPE710 5GHz 867Mbps

1. 5GHz 867Mbps Wireless Speed for high-speed, low-latency connections.
2. 23dBi High-Gain Directional Antenna for maximized range and signal strength.
3. MU-MIMO and Beamforming Technology for efficient multi-device communication.
4. IP65-Rated Weatherproof Enclosure for outdoor durability.
5. Passive PoE Support (up to 60m power delivery) for flexible installation.
6. Centralized Management via Pharos Control Software for easy device monitoring.
7. Adjustable Transmission Power (0-27dBm) for customized range settings.
8. TDMA Technology for improved network efficiency and reduced interference.
9. Multiple Operating Modes (AP, Client, Repeater, Bridge, Router).
10. Built-in Surge Protection for reliable operation in harsh environments.

Competitor Products

1. Ubiquiti PowerBeam AC Gen2 – A high-performance 5GHz CPE for long-range links.
2. MikroTik LHG XL 5 ac – Another long-range 5GHz outdoor wireless solution.

The CPE710 5GHz 867Mbps 23dBi Outdoor Wireless CPE is a powerful and cost-effective solution for long-range, high-speed wireless networking, making it ideal for businesses, remote areas, and large outdoor deployments.