CPE610 5GHz 300Mbps 23dBi Outdoor Wireless CPE

Overview

The CPE610 5GHz 300Mbps 23dBi Outdoor Wireless CPE is a high-gain outdoor wireless device designed for long-range point-to-point (PtP) and point-to-multipoint (PtMP) applications. With a 23dBi directional antenna, advanced TDMA technology, and IP65-rated weatherproof housing, it delivers reliable and interference-free wireless connectivity for wireless ISPs, CCTV networks, and remote networking solutions.

How to Use/Install

1. Unbox the CPE610 and verify all included accessories.
2. Mount the device on a pole or wall using the provided mounting hardware.
3. Connect an Ethernet cable from the LAN port to the PoE injector.
4. Connect another Ethernet cable from the PoE injector to a router, switch, or network source.
5. Plug in the PoE injector to power on the device.
6. Access the web interface at http://192.168.0.254 and log in.
7. Select the operation mode (AP, Client, Repeater, or Bridge) based on your network setup.
8. Align the antenna for optimal signal reception and transmission.
9. Save settings and reboot the device for final deployment.

Available Services/License/Plans

1. Point-to-Point (PtP) Mode – Creates a direct, high-speed wireless bridge between two locations.
2. Point-to-Multipoint (PtMP) Mode – Connects multiple remote sites to a single access point.
3. Access Point Mode – Converts a wired connection into an outdoor Wi-Fi hotspot.
4. Client Mode – Connects to an existing Wi-Fi network as a receiver.

Differences Between Services/Plans

• PtP Mode: Best for wireless bridging between two remote buildings or locations.
• PtMP Mode: Ideal for wireless ISP deployments or multi-site connectivity.
• AP Mode: Creates an outdoor Wi-Fi network for large areas.
• Client Mode: Acts as a receiver to connect to an existing Wi-Fi source.

10 Key Features of CPE610 5GHz 300Mbps

1. 5GHz 300Mbps Wireless Speed for fast and stable long-range connections.
2. 23dBi High-Gain Directional Antenna to maximize signal strength and range.
3. TDMA Technology for efficient bandwidth allocation and reduced interference.
4. Outdoor-Optimized Design with IP65-rated weatherproof housing.
5. Passive PoE Support (up to 60m power delivery) for flexible placement.
6. Centralized Management via Pharos Control Software for easy device monitoring.
7. Adjustable Transmission Power (0-27dBm) for customized range settings.
8. Multiple Operating Modes (AP, Client, Repeater, Bridge, Router).
9. Built-in Surge Protection for reliable operation in harsh environments.
10. Ideal for Wireless ISPs, CCTV Surveillance, and Rural Internet Deployment.

Competitor Products

1. Ubiquiti PowerBeam M5-400 – A 5GHz outdoor CPE with a high-gain directional antenna.
2. MikroTik LHG 5 – Another long-range 5GHz wireless solution for PtP and PtMP setups.

The CPE610 5GHz 300Mbps 23dBi Outdoor Wireless CPE is a high-performance and cost-effective solution for long-range wireless networking, making it perfect for businesses, rural internet providers, and outdoor network expansions.